Skip to content
FLORES BROTHERSPATIOS · DRIVEWAYS · WALKWAYS
Call

Concrete Driveways

Concrete Driveways in Southwest Florida

Poured concrete driveways engineered for Florida sun, sand base, and heavy vehicle loads.

Broom-finished concrete driveway at a single-family home in Southwest Florida

Illustrative image — not presented as a completed Union Business Group project. [PROJECT PHOTO REQUIRED]

Get My Free Estimate

Takes about 30 seconds from your phone.

Free, no-obligation estimate. Prefer to talk? Call 239-506-7381

Free Estimates

No-cost, no-obligation written estimates on every project.

Local Southwest Florida Contractor

Serving Lee and Collier County communities.

Quality Materials

Ready-mix concrete, pavers and travertine from established suppliers.

Florida Climate-Focused Build

Base prep, slope and drainage planned for summer storm season.

Licensed

A registered LLC you can trust in your home.

The Problem

Cracked, sinking, stained or undersized driveways are one of the first things a buyer or neighbor notices. In Southwest Florida the usual causes are thin slabs, poor sub-base compaction over sandy soil, missing control joints and water that has nowhere to drain during summer storms.

How We Solve It

We rebuild the driveway from the ground up: demolition and haul-off, grading, compacted base, correct slab thickness for the traffic it carries, reinforcement where the scope calls for it, and jointing laid out so the concrete cracks where it is supposed to — in the joint, not across the middle of your slab.

What You Get

  • Curb appeal that reads as a maintained, well-built home
  • A surface that sheds water away from the garage and foundation
  • Fewer repairs than a patch-over-patch driveway
  • Clean edges and consistent finish across the full pour

Included in Scope

  • Tear-out and haul-off of the old slab
  • Grading and base compaction
  • Forming and jointing layout
  • Broom, smooth or decorative finish
  • Apron and sidewalk tie-ins
  • Site cleanup

Materials We Use

  • Ready-mix concrete
  • Reinforcement per scope (fiber, mesh or rebar)
  • Compacted base material
  • Expansion joint material
  • Optional sealer

Simple, no pressure

How a Concrete Driveways Project Works

  1. 1

    Tell Us About Your Project

    Send measurements, photos, and what you have in mind by form, phone, or WhatsApp.

  2. 2

    Schedule Your Estimate

    We visit the property, review grading, drainage, and access, and confirm scope.

  3. 3

    Review Your Options

    You get a written scope with materials, thickness, finishes, and pricing options.

  4. 4

    Build Your Project

    Layout, base prep, installation, cleanup, and a final walkthrough with you.

We do not quote a fixed turnaround time until we have seen the site — weather, permitting and material lead times all affect the schedule.

Answers

Concrete Driveways — Common Questions

Residential driveways are commonly poured 4 inches thick, and thicker where trucks, RVs or trailers park. The right spec depends on soil, base prep and expected loads, so we confirm it on site.

Where We Provide Concrete Driveways

Free estimate

Ready to Improve Your Property?

Tell us what you have in mind — a driveway that needs replacing, a patio that never got built, a pool deck that gets too hot. We will look at it and give you a straight, written estimate at no cost.